Contact Us

When looking for a concreter, you should ask to see examples of their previous work. This will give you an idea of the quality of their work.

You should also ask about the concreter’s experience and qualifications. They should have at least five years of experience and be qualified in concreting.

It’s also important to get references from past clients. This will give you an idea of the level of service and quality you can expect from the concreter.

There are different types of concrete depending on the aggregate (rocks, gravel, sand) used in the mixture. Here are some of the more common types:

Portland cement concrete: The most common type, made with crushed stone or gravel, sand, and Portland cement. This type is strong and durable.

Bricklayer’s mortar: A very dense concrete mix that is used for laying bricks and other masonry units. It contains a high proportion of lime to make it waterproof and frost-resistant.

Screed concrete: A lightweight mix used to fill in low spots or level surfaces before paving or other finishing work is done. It contains a higher proportion of air than other types of concrete, making it perfect for residential homes.

The strongest concrete is made with high-performance concrete (HPC), which has a compressive strength of more than 4,000 psi. It’s also more expensive to produce because it requires an expert contractor and precise mixture proportions.

Regular Portland cement has a compressive strength of only about 1,500 psi, so it’s not suitable for use in high-performance applications. In order to achieve the higher strengths required, HPC uses supplementary materials such as fly ash or slag that are added to the mix to enhance the cementitious reaction.

These materials also help improve the durability of the concrete by increasing its resistance to chemical attack and sulfate attack.

Concrete prices vary depending on the region, but on average it costs between $140 and $180 per cubic meter. Additional factors that can affect the price include the complexity of the pour, the additives required, the contractor you’re using and whether or not you have the concrete delivered.

There are a few things to look for when trying to determine if a concrete contractor is reputable.

First, check to see if they are licensed and insured. You can usually find this information on their website or by asking them.

Second, ask for references and do some research online to see what other people have said about their experience with this contractor.

Finally, get quotes from several different contractors and compare pricing before making a decision.

You should expect a contractor to come to your home and give you an estimate of the cost of the project, how long it will take, what is included in the project, and what is not included in the project.

You should also expect a contractor to be licensed and insured, to have a good reputation, and to be able to provide references. Finally, you should expect a contractor to work diligently and finish the job on schedule.

The steps involved in installing concrete vary depending on the type of concrete being poured. For example, if a foundation is being installed, the following steps might be taken:

1. Excavate the area and grade it correctly so that the foundation will be level.
2. Place steel reinforcing rods in the excavation and tie them together with wire.
3. Pour a layer of gravel into the hole to help drainage.
4. Pour a layer of Portland cement into the hole and spread it evenly.
5. Place the steel reinforcement rods onto the cement, leaving about 4-5 cms of space between them and the sides of the hole.
6. Pour more concrete over top of the reinforcement rods until they are completely covered.

The most popular finish for concrete is a polished concrete. In this process, the concrete is ground down to a very smooth surface using diamond grinders. This leaves the surface with a high shine and a slightly reflective finish.

Other finishes that can be applied to concrete include acid staining, color sealing, and stamped overlays. Acid staining uses acid to create unique and varied colors on the surface of the concrete. Color sealing involves applying a tinted sealer to the concrete which will protect it from fading and staining. Stamped overlays involve stamping a pattern into wet concrete which gives it a textured finish.

Yes, you can have colour added to your concrete. In fact, almost any colour is possible. The process of adding colour to concrete is called “staining.”

There are a few different methods that can be used to stain concrete: acid staining, water-based staining, and solvent-based staining.

Each method has its own set of pros and cons, so it’s important to choose the one that will work best for your project.